• 0
  • 0

Introduction to Titanium Carbide TiC Powder

Introduction to Titanium Carbide TiC Powder

Titanium carbide or TiC is a classic transition metal carbide featuring a NaCl cubic structure. It has high melting point, hardness as well as a very high Young's permeability, excellent quality chemical stability, excellent wear resistance and corrosion resistance, and good thermal and electrical conductivity. Therefore, it offers a wide range of applications and has a great potential in cutting tools, aerospace components, protective coatings against wear, foams and infrared radiation materials.

The applications for Titanium Carbide TiC Powder

1. In the manufacture of various multiphase materials

Titanium carbide-based ceramics are extremely hard tool materials, TiC and TiN as well as WC, A12O along with other raw materials made from various multiphase ceramic materials, these materials have a great melting rate, high hardness, excellent chemical stability, is the most popular material for cutting tools, wear-resistant pieces in addition, they are extremely electrically conductive which makes them the best choice for electrodes.

Cutting tool material: Thanks to some percentages of TiC hard particle dispersion in the matrix, Composite cutting tools do not just improve the toughness however, they also, to a degree, increase crack toughness, which is greater than the natural tool cutting tools by a significant amount. A12o3-tic ceramics can be utilized as armor materials. As a material for tools, the hardness is much higher than (C N, C) and Ti(C N, C) due to N. To allow it to be used on steel and other cutting materials, the friction reduction is drastically reduced. The material offers many advantages to cutting. Through the combination of the advantages of Ti and (C, N) to form Multiphase Ceramics (MPC), a promising tool material can easily be made.

2. The materials are used as coating materials

Diamond coating: This production method used for diamond tools is mostly a powder metallurgy impregnation method. Due to the high interaction energy between diamonds and more general metallic or alloy the diamond surface cannot be affected by any alloy or metal having a low melting points as well as its bonding capacity is poor. In recent years, many researchers have conducted a great deal of research on enhancing the bond strength between metal and diamond. The active metal method is the one most frequently used that is, for example, adding a small amount of titanium to strengthen the bond between metal and vanadium, chromium, and other active metal, tool for sintering in liquid phase where the active material is made up of high carbon compounds. These form the elements and the affinity for diamonds is enormous, and allows for the enhancement of the diamond's surface to enable the metallurgical bond of diamond and metal bond. The strength of the bond is influenced by the quantity of active metal, the sintering temperature and time as well as others, and needs an extrusion of the binder to enable the enrichment of active metal at the interface due to the fact that this method is not appropriate for hot pressing sintering of metal and diamond powder within a short solid phase.

3. Useful for preparing foam ceramics

A filter, ceramics remove inclusions in any fluid and their filtration method is an agitation process and adsorption. The filter needs the chemical solidity of the substance, particularly in the metallurgical sector which has a high melting filter, and this type of material can become oxide in the majorityof cases, as well as to adjust to the filtering mechanism of metal melt, which is the main objective and goal of thermal shock resistivity. Titanium carbide foam ceramics have greater hardness, strength, electrical conductivity, plus corrosion and heat resistance that oxide foam ceramics.

4. It is used in the infrared radiation of ceramic materials

Titanium carbide is a type of intermetallic compoundthat has generally displayed good chemical stability. without a change in the state of valence and it is subject to high-temperature decrease in the process of preparing samples. Parts of the titanium ions show a delay effect to manifest, and are aimed at the solid of titanium ions melting into the structure of cordierite the structure. This is followed by a change in the structure. When compared with a single substance it is more effective in radiation. the substance near 3tma is clearly improved, which is perfect for use in the area of high temperatures.

Main Supplyer of Titanium Carbide TiC Powder

We are a reliable global chemical material supplier & manufacturer with more than a decade of experience providing high-quality chemicals as well as Nanomaterials, such as silicon powder, nitride powder, the graphite-based powder zinc sulfide calcium nitride, 3D printing pigment and so on.

If you are looking for the highest-quality titanium carbide TiC powder Contact us for more information. contact us to send us an inquiry. (

Inquiry us

  • tags

Our Latest News

Purpose of weighing animals and application of sheep weighing systems

Animal measuring is one of the most important tasks in farm management. If you are a farmer, you should appreciate the importance of staying up-to-date with all facts about individual animals. A livestock scale is a critical tool if you are looking t…

Quick test of LH ovulation and popular science of p24 test

A woman is most fertile on certain dates of their menstrual cycle. The fertile window generally covers the six-day period which ends with the date of Ovulation. There are a number of effective methods…

Selection of livestock names and popular science of sheep weighing systems

If you're looking to start using scales for livestock on your farms, you can choose from many kinds of scales you can pick from. Most of the scales sold come with a platform, a load bar, and an indicator. They can be used on farms.…